8 Tips For DIY Installation Of Synthetic Putting Greens

Stores supplying artificial turfs offer installation packages as well. This comes with an additional cost that can be avoided through a simple DIY procedure. Synthetic putting greens are easy to install with all the contours and drainage requirements. When you DIY, you reduce the cost and are satisfied for personally improving the appearance and value of your compound.

Take measurements of the area that needs to be covered. You do not have to possess professional tools like tape measures. A rope or string will perform the task effectively. This will give you an idea of the size of turf to purchase. The measurements should be made to the nearest straight line.

The measurements you have take are transferred to a paper and combined to give a comprehensive perspective. The measurements should include the entire area where you need to lay the turf. It helps you develop the best yard regardless of constrains such as space. The turf you purchase should come with provisions for extensions to accommodate unconventional areas.

Drainage forms part of the overall design. It keeps the turf free of floods and allows you to play immediately after a storm. The other areas around the compound will not direct water towards your turf. Marks on the area are made using chalk or special sprays. They indicate reasonable boundaries to guide you when laying the green.

It is important to determine if you are doing an above-ground work or in-ground putting in Seattle, WA. A sod cutter or shovel will be required to perform this task. All debris must be removed as well to provide a level ground for laying the turf. Solid materials like wood and large stones should be removed to ensure a consistent surface below.

Pounding makes the ground solid and is another way of leveling before pouring base material. A solid base is perfect for laying the weed barrier before base material can be poured. Boundaries are marked with a specific edging that is strong enough to maintain the shape of your yard despite pressure during pounding.

Pounding is used to give you a solid and firm surface which is perfect when laying the turf. Simple tools like strings are used to ensure that the surface is level. Drainage channels should be situated on the edges. Channels that are in the middle destroy the surface below through water logging. This will affect firmness below the ground and eventually cause loss of flatness.

The slope that facilitates effective drainage is achieved by slanting the surface by an inch for every ten to fifteen feet. Contours are easy to achieve on areas where they are needed. They must be developed without compromising on the solidness of the base. You have the freedom to generate contours of any design.

Artificial greens come with user instructions that are vital when performing a DIY installation. This is an effective way to reduce cost and achieve the satisfaction of knowing that you made a difference in your yard. It is a challenge that can be taken when you are out on vacation without having to spend much money.

You can visit www.syntheticturfnorthwest.com for more helpful information about 8 Tips For DIY Synthetic Putting Greens Installation.

Leave a Reply

Your email address will not be published. Required fields are marked *